How to clean and maintain the CNC cnc machining center during the 2020 Chinese New Year holiday?
Release time: 2020-01-14 09:02:50
1.Cleaning of sheet metal in CNC CNC machining center
The outer sheet metal of the cnc machining center must be thoroughly dusted to ensure that the paint layer of the outer sheet metal of the machining center machine is kept clean and protected from damage.
2. Inspection of main parts of CNC machining center
；并且更换新的液压油以及润滑油。 From the hydraulic, lubrication system, air system, and cooling system of the machining center; then check the condition of the pressure gauge; clean the oil window, clean the oil gauge and the filter, and then remove and clean the fans at the servo motor ends; And replace with new hydraulic oil and lubricant.
3. Check the response of the CNC machining center
First check the pneumatic components and valves of the cnc machining center, and then check the state of the solenoid valve. For unfavorable disassembly and cleaning or replacement.
4.Clean the electrical part of the CNC machining center machine
Clean the system and electrical components of the CNC machining center machine tool to ensure tight fastening, the system battery voltage is normal, and back up the CNC machining center machine data
动作状况 5.Check the operation status of CNC machining center
Check the operation status of the tool magazine and robot, and clean the tool cover, the cylinder and the robot.
内部清理 6.Internal cleaning of CNC machining center
Open the protective cover of each shaft, completely clean the greasy, iron filings, guide rails, lead screws, the inner hole of the spindle, the work surface and the T-slot, and change the anti-rust oil seal.