中国福彩网

Product Categories Product Categories
Related Products
VMC850B Hard Track Machining Center
XK7124 small machining center
VMC840 Hard Track Machining Center
VMC640 small machining center

Vertical Machining Center

  • VMC7050 CNC machining center
  • VMC7050 CNC machining center
  • VMC7050 CNC machining center

VMC7050 CNC machining center

Product parameters:

Standard system: Beijing KND system Maximum stroke: 700 * 460 * 600
Spindle speed: 8000 rpm Highest accuracy: within 2 wires of hard rail; within 0.01 wire of linear rail

13863258060 Consulting Tel: 13863258060
<
  • VMC7050 CNC machining center
  • VMC7050 CNC machining center
  • VMC7050 CNC machining center
>
  • Detailed parameters
  • Related videos
  • Product configuration table

    product manual

        Vertical machining centers are mainly used to process parts with high accuracy, multiple processes and complex shapes such as plate, disk, housing, mold, etc., which can continuously complete milling, drilling, expanding, reaming, boring, Tapping and precise machining of two-dimensional and three-dimensional curved surfaces and bevels can be programmed to shorten the production cycle, thereby enabling users to obtain good economic benefits.



    name

    specification VMC7045

    unit

    working desk size

    1000 × 420

    mm

    Allowable maximum load

    400

    kg

    T-slot size

    18 × 5

    mm × pcs

    Maximum travel of table-X axis

    700

    mm

    Maximum travel of carriage-Y axis

    400

    mm

    Spindle travel-Z axis

    600

    mm

    Distance from spindle end to worktable surface

    700/100

    mm

    Distance from spindle center to Z-axis guide plane

    460

    mm

    Taper holes (7:24)

    BT 40


    Speed range

    50 ~ 8000

    r / min

    Spindle motor power

    5.5 / 7.5

    kw

    transfer method

    Synchronous toothed belt


    X axis, Y axis, Z axis

    36 * 36 * 20

    m / min

    Feed rate

    1-10000

    mm / min

    Tool magazine form

    Manipulator


    Tool magazine capacity

    16

    Put

    Machine size (length × width · × height)

    2786 × 2200 × 2622

    mm

    Machine weight

    4800

    kg



    VMC7050 CNC machining center related content
    1. Cleaning of sheet metal in the CNC machining center The outer sheet metal of the CNC machining center must be thoroughly dusted to ensure that the paint layer of the outer sheet metal of the machining center machine is kept clean and protected from damage. 2.The main of CNC machining center:
    As an old man doing dry machining, I still know a little bit about the maintenance of CNC machining center machine tools, because in our machining process, it seems like the spindle of the vertical machining center.
    Internationally better brands CNC cnc machining center machine tools have the following types of well-known European brands: Mikron, Archie, Charmilles, Rhodes, Demag, and other Japanese brands are more well-known: Makino ..
    The product is a plastic impeller, we should look very familiar, because this product is a typical part of a CNC cnc five-axis machining center. However, if we want to use a mold to batch ..
    Generally, cnc machining centers are assumed to be used for products, and they purchase linear rails. If they are processing molds, they buy hard rails, which have higher accuracy than hard rails, but hard rail cnc machining centers are more robust. Hard Track Features I. Hard Track cnc ..
    In the eyes of some Chinese, foreign machine tools have fewer problems and domestic machine tools have more problems, but is this true? Why is this happening? Imported CNC machining center machine tools
    1. Selection of the processing policy Before acknowledging the purchase policy, it is necessary to clearly define the processing policy. Generally speaking, parts with the following characteristics are suitable for machining in a machining center: Multi-process intensive workpiece refers to a workpiece ..